Braemar Error Codes & Troubleshooting

Turn off system immediately. Contact Braemar technician for board replacement.

Check gas supply at meter. Call service urgently.

Check pilot light access. Professional repair needed if no flame.

Clean sensor. If error persists, sensor replacement required.

System shutdown for safety. Call Braemar technician immediately.

Check filter status. Verify motor power. May need replacement.

Inspect ductwork for blockages. Clear obstructions.

Check vent for ice/snow blockage. Professional inspection needed.

Allow cooling 30 mins. Check for blocked air returns.

Contact gas supplier. Verify line pressure.

Replace thermostat batteries. Check wiring connections.

Power cycle system. Transformer replacement needed.

Professional repair required. Do not attempt DIY.

Check lubrication. Motor replacement may be needed.

Replace furnace filter immediately with correct MERV.

Check all vents and registers. Remove obstructions.

Check thermostat. May indicate oversized system.

Allow cooling. Check airflow. May need replacement.

Leave home immediately. Call gas company from outside.

System in safety mode. Professional reset required.