Sharp Error Codes & Troubleshooting

Clean electrode area. Power cycle.

Clean sensor. Check connections.

Clean filter. Check motor power.

Check for obstruction. Clean unit.

Professional leak detection needed.

Shut down immediately. Check condenser.

Cool for 30 mins. Check airflow.

Professional evacuation and recharge.

Clean condenser. Verify airflow.

Check power supply connections.

Replace batteries. Check sensor.

Check outdoor coil ice.

Set correct operating mode.

Replace filter immediately.

Defrost mode or COOL mode.

Check circuit breaker and wiring.

Professional refrigeration service.

Clear drain line immediately.

Professional inspection recommended.

Check control cable. Power cycle.